MASKING MATERIAL/ LIFTING TAPE
THIS MASK IS RECOMMENDED TO BE USED WITH 3G+ (PLUS)
- Roll Size: 20 inches x 2 yards (50.8cm x 182.88cm)
- Available in larger roll size here
- This mask is wound on a backer allowing for multiple uses
We suggest that you make sure the ink/print has dried before using. The liner sometimes creates the same waffle-type pattern onto the adhesive layer, so when you pull the liner off, you can look at the adhesive and see the same pattern from the liner. If you do not let the print dry long enough. When you apply the mask to lift and then press, you can sometimes see the same pattern in the transferred design. Waiting until the ink drys is highly recommended.
Other sizes and samples available upon request. Please contact email@example.com